I hung a 65" Frame tv over my fireplace and was able to get at least one screw into a stud on each side, so I was fine with that and then used the nylon snap toggle bolts for the other holes. For reference, even an outlet cover behind the tv causes problems. If so, the plywood option has negative impacts and will look like poop. Those look like the brackets for the samsung Frame tv. I'd honestly prefer to leave the wall alone but that is another discussion! Hopefully it will mount incognito and will look like art. I don't want to hack up the wall if I don't need to. I'm trying to make this somewhat reversible/minimal impact. an option for these types of walls?Ģb.) If I can't land on a stud - can I just use toggle bolts/anchors/etc? This TV weighs 50lbs A few questions:ġ.) Any better way to verify I have found a stud? Especially before I start drilling?Ģ.) If I have to put at least one mounting bolt outside of a stud - are toggle bolts etc. There are specific guidelines on which holes I need to use.Īssuming I have found a stud (a unverified IF), then at least one of the 1 of 3 bolts will not land on a stud. I tried a regular stud finder, a magnet, etc and looking around online, this seems to be the ticket. I *think* I have found a stud using a Zircon metal detector stud-finder (finds metal - theoretically finding nails along the vertical studs). I stuck a boroscope camera in there and can see the lath boards. I checked behind the sconces and there is a small hole for the wiring. This TV is gong to cover up the arch, but appear to rest on the ledge. There is an arch inset into the wall with a wooden ledge. This is a 1930's home and though I would prefer not to, we have decided to hang a TV in one of the rooms. I don't have any experience with these older homes and could use some input.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |